| Back to logs list
Photo Name: post-look Raiders,
1, open the original image material, the first hook with the pen tool to figure out, press Ctrl + Enter the path to selection, press Ctrl + J to copy characters to the new layer.
2, press Ctrl + M to adjust the curve of the cutout character, values: 47,60
3, create a new layer, fill color: # 0A6A60
4, the figure on the skin to the head of this half to pull out, to the new layer.
5, the foreground color set to green, (water color mapping can be set according to need), set the background to white, select the menu: Image> Adjustments> Gradient Map. Adjust the images are monochrome chiaroscuro.
6, Filter> Artistic Effects> plastic packaging, data adjusted according to individual needs to be done, the main effect is the extraction of high-light some of the water, so the plot is very water do people imagine the face of high light adjust the density and degree of evacuation, according to the characteristics of the water, people can receive the information the eye is the only high-light the darkest part of the other part is transparent.
7, select the layer 3 copy, press Ctrl + Alt + Shift + ~ to bring up high-light selection, press Ctrl + Alt + Shift mouse click on the layer 3 copy, so the people outside the constituency to lose, then the new map 4 layers filled with white.
Photo Name: publicity to create beautiful ice-blue tones,
8. In order to make figures and screen colors have echoed to the character's point of lip gloss on the lips, create a new layer, select the Linear Dodge blending modes, add 90753D color, choose the brush on lip gloss, powder point pen, pixel 39,
9. enlarge the lip gloss reflective parts of the draw, observe, constant adjustment, the overall picture look good after lip gloss, this time the screen has a echoed, color become rich, not overwhelming, just bring out a product,
10. If the product directly with the body in the model, and people tune in to lust after, or with the mask color to the product directly to the plug out of the product can.
Photo Name: Wizard of supernatural effects,
15. New soft coating, copy the background layer, selection foreground color (blue lake), R = 133, G = 244, B = 244
16. Create a new layer, brush hair range, < br> 17. New color layers, foreground - # 6fc8c8, R = 111, G = 200, B = 200,
18. new color layer, brush hair and beads on top of snow, available eraser, set low opacity, transition. Hair coloring range of local, multi-layers can be more natural.
19. loaded brush Star decoration interface,
20. blue soft brush to the whole layer of skin, plus cold tone and unity of the screen. New independent group of skin color, the new skin and soft layers, line brush hardness to 0, the foreground color to blue lake. To the faces, light and dark being of high distinction, used in blue and pink. Multi-layers of paint on the natural transition.
Photo Name: PS to the landscape watercolor effects,
1. Duplicate the layer and adjust - to color,
2. curve adjustment, increase the chiaroscuro, the input 114, output 186
3. Duplicate the layer, Filter - Brush Strokes - ink outline the stroke length of 5, 10 look-strength, light intensity of 10, falling into a soft light layer mode, adjust the opacity,
4. Filter - Gaussian Blur, Radius 2.0 pixels,
5. Filter - Brush Strokes - spray, spray radius of a color, smoothness, 3,
6. add the light brown solid layer, Figure Cen Enchanters of color, adjust opacity, not transparency, some as small as possible,
7 points out of a solid color layer and the layer in front of the eye to hide it, the new layer with the brush in the lanterns, trees, tiles, etc. with the appropriate color layer,
8. to restore a hidden layer, change the layer mode to overlay, to see the effect to tune the details,
9. the overall effect on the screen to fine tune, until satisfactory results, no specific steps vary
photo Name: oil painting effects,
12. Double-click the path layer pearl, set the layer mode, Projection: structure - Multiply, black, 28% opacity, angle 120 °, distance 0, 0 extension, size 5 pixels, the quality - variegated 0 . Bevel and Emboss: structure - embossed, smooth way, the depth of 120%, direction, shadow - angle 120 °, Multiply mode, white, opacity 33%, shadow mode Multiply, blue, opacity 36 %.
13. shape with rubber trim tool, add a mask, opacity 32%, coated beads, the beads and the hair below the actual situation with,
14. Create a new layer, arranged in different sizes with snow brush screen, adjust the snow layer styles, Projection: structure - Multiply, black, angle 120 °, Use Global Light, from 7 to expand 5%, size 1. Within the projection: Multiply, black, 12% opacity, angle 120 °, distance 7, blocking 10%. Outer Glow: structure - color filter, opacity 73%, lake blue pixels - soft approach, the size of 5 pixels, the quality - 50% range. Bevel and Emboss: structure - Outer Bevel styles, methods, smooth, 281% depth, direction, shadow - angle 120 °, Use Global Light, height 30 °, high light pattern color filter, 75% opacity, shadow mode Multiply, black, opacity 75%
14. draw the hair texture, the new layer, layer mode to Overlay, choose a pencil to 1 pixel, (picture size to the value determined according to figures), along the hair color is DFDFDF draw smooth texture lines
15. horsetail some choose the brush tool, brush lightly with a fork along the texture of some of the painting, the color layer model above,
16. Create a new layer, the normal mode, select the brush tool, pixel 1, opacity 60%, 80% flow, the color is white, draw dynamic forehead hair,
17. clothes and necklaces with the smudge tool applied in some softer, and then choose to use the Dodge tool, the range is the high light , exposure 20%, clothes and necklaces to enhance the high light
18. synthesis of the whole image sharpening, sharpening value is 8, with the Dodge tool to highlight some of the little processing, the overall color correction, the ( can be modified to add some background light, highlighting the theme)
1, open the original image, copy the layer
2, curve adjustment, the value RGB: 109,99
3, hue saturation, value: 0, -39,0
4, color balance , values: 0,0, -34
5, optional colors, neutral colors: 0,0, -20,0
6, a new layer, fill d7b26c, layer mode overlay, opacity 56 %,
7, the clouds pull material into the figure, the top into the artwork, soft light layer mode, the outside part of the sky in addition to wipe out, back layer (Ctrl + Alt + Shift + E)
8, optional color, black: 0,0, -14, -5
9, a new layer, fill 0d1d50, layer mode exclusion, to copy a layer, filling 52%
10, curve adjust the value RGB: 128,155
11, color balance, value: +24, +7, -64, filling 70%
12, Levels, value: 29,1.00,227, filling 58% < br> 13, an optional color, neutral colors: +16, +12, -11, +5
14, back layer (Ctrl + Alt + Shift + E), color balance, value: +24, +7, -64, filling 38%
15, back layer (Ctrl + Alt + Shift + E), opacity 46%, filling 48%,
16, Ctrl + E Merge Visible, Sharpen about
Photo Name: the real picture transfer plaster statue,
1, turn on the background material and the printer, the printer to pull out, copy came in the appropriate position gracefully.
2, open the leopard material, drag the appropriate adjustments come in good size and angle, with the pen tool to pull out of leopards to the new layer.
3, with the pen tool tick printer paper outlines the path to selection, press Ctrl + Shift + I invert the selection and press Delete to delete,
4, the paper layer to the stroke, then Jiameng version to In addition to excess,
5, the top layer of paper to create a new layer, right front foot leopard with a black pen to draw the shadow, the shadow of printers and paper, due to lower transparency,
6, more need to add the final advertisements and text to complete the final results.
Photo name: bring up the nostalgic landscape photographs,
1. a picture with the white side of the picture landscape plan, as do the edges with a white border spillover effects
2. hue saturation: saturation +80,string bikinis swimwear, adjust the impressionist effect,
3. editor - Define Pattern.
4. to build a white fill layer, 50% opacity, to build a transparent layer
5. pattern stamp tool, brush the main diameter of 200, comes with the brush wet media brushes 45 election, mode normal, opacity 100% , Impressionist in front of check,
6. in a transparent layer pattern stamp painting, large long-term time King strokes, whereas the small details of the multi-stroke, adjusting the opacity of the layer above to view strokes,
7. Copy Background layer to the color filter - splash, 71% opacity, layer mode to Overlay
8. Filter - Texture - textured, opacity 100%,
9. filter - distort - spread light 37%
Photo name: a magical picture effect,
1, the background copy layer, use Pen tool to pull out the first part of the eye, Ctrl + Enter, the path to transform into a constituency with a straw, draw around the color white of the eye, the eyes fill,
2, the new layer, using the pen tool in the copy of the layer outline to the people portrayed, and the boundary path switch, press Ctrl + C, Ctrl + V to paste the new layer
3, select the generic Stamp tool, the edge of the forehead hair slightly modified, after the completion of a copy of the layer, and turn into a Smart Object layer.
4, Filter - Stylize - Emboss, angle 135 °, height 3, number 142, Filter - Noise - the middle value, the radius of 2. Change the layer blending mode [overlay].
5, add a black and white adjustment layer, and load line of the path just described, by Ctrl + Shift + I reverse and fill the black, so that part of the screen, only to become a black and white portrait images.
6, select the Clone Stamp tool, eyes and ears will be slightly modified.
7, with the pen tool, hair and eyebrows were selected together, then cut to the color layer on the layer. Ctrl + C, Ctrl + V, and a copy of the other layers of the eyes closed.
8, cut to the Channels palette, copy the red channel, Filter - Blur - Surface Blur, radius 2, threshold 33%, after holding down the Ctrl key, point toward the red color version of the thumbnail look.
1. Open image, duplicate the layer, use the Lasso tool (more detailed, clean) the hook out of the skin, (channels can also be), replicated the hook out of the skin,
2. Image - Adjustments - Optional color, neutral colors: -49, -5, +100,0
3. on the part of the tick, copy, image - adjustment - optional colors, neutral colors: +35, -37, +64, + 22
4. hook pants, copy, image - adjustment - optional colors, neutral colors: -29, -48, -31,0. Ctrl + L Levels adjustment pants sense of light, color scale: 0, 0.81,175
5, tick hair, reproduce, need not be very clean, the edges a little background color, can make hair even more integration, tick the background,
6. color, image - adjustment - optional colors, Neutral colors: -30, -47, +100,0.
7. Select the background layer, (no hair, no skin, no pants that layer), press Q to enter quick mask, select the gradient tool, black to transparency, gradient from upper left to lower right pull, that have elected black range, and you can press Q to exit Quick Mask, Levels: 0,0.32,255
8. the same way to the left light tune out, according to Ctrl + A, Ctrl + Shift + C, Ctrl + V, all the layers are copied to a layer, into the top, superimposed, the color more vivid,
9. details of some (whites , eyes, lips, slippers, nail) color, add in the final map lighting effects, feel the car drove up,
Photo Name: Classic movie posters made,
8, hold down the Ctrl key and click on the layer 4 switch into the selection, press Ctrl + Shift + I invert the selection and press Delete to delete, clean, delete a few more points.
9, the layer 4 to selection, select the layer 3 copy, point mask button (which can hide the shadow layer). Then brush the excess high light on the character wipe, 3 copies of the same layer mask is also set up, wipe the excess high light.
10, layer 3 is set to Drops material to find online.
11, it is best to find the water black background material, if it is white or other colors of the water background material, can reduce or reverse the saturation of the background to black, set the color filter layer properties will Black masked, leaving only the white transparency of the water, when the collage to see the direction of the water to find a suitable location collage up to take advantage of the mask to the interface between water, people place the root handle.
12, the background color of the final deal.
Photo Name: making a horror movie,
broken glass brush: Broken Glass brush
blood brush: Blood stain brush.
1, press CTRL + U to adjust hue / saturation, color tick, value: 220,26, -9
2, change the eye color, use the Lasso tool to select the eyes. Then adjust the hue / saturation, color tick, value: 117,47,7
3, using a 13px -15 px brush in eye shadow around the drawing, set the black mode to Multiply, opacity 25 %, flow 25%, draw around the eyes, the same method to modify the lips.
4, create a new layer, fill color # 31425e,
5, broken glass pen to draw.
6, add layer styles, projection, Multiply, Opacity 75%, angle 120 °,
7, CTRL + E Merge layers, with the lasso tool to select the broken area, change the opacity to 80 %, duplicate the layer, adjust the mode to Multiply,
8, Filter - Render - Lighting Effects, points of light, intensity 53, Focus 69,
9, the last brush to draw some blood and then blood < br>
Photo Name: Photoshop creative synthesis poster printer,
1. open the file, copy a layer copy of the
2. Select the duplicate layer of free transform to change the shortcut key ctrl + t to make the characters more slender face shape
3. by Merge Layers (ctrl + e), the use of cutting tools to upload images from a new composition, cut off the extra part,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50. yellow - 40, -20, -30, -80, white -0,0,0, -50. halftones -0, -5, -5, -5
5. according to curve (ctrl + m) adjust overall color, RGB full-channel - output 214, input 174 and blue channel - output 131, input 124,
6. Image - Adjustments - Color Balance (ctrl + b), the shadow -10,0, +15. High light - 10,0, +2.
7. Around the mouth with a seal tool to cover the skin evenly,
8. With a pen to circle dark bags under the eyes and face, the emergence 60, curves to brighten the constituency Dodge reduce bags under the eyes and facial muscles are not relaxed expression,
9. continued emergence constituency 60, curve brighter, so that the face full, the output 146, input 113.
10. circle to highlight some of out, feathering 60
6. Create a new layer, Ctrl + Shift + Alt + E back layer, Ctrl + Shift + U to color, layer blending mode to
7. Create a new layer, Ctrl + Alt + ~ to bring up high-light selection, fill color: # FBF4C4, layer blending mode to . Create a new layer,g strings bikinis, Ctrl + Shift + Alt + E back layer proper look at the details of the modification, the final sharpening what
Photo Name: Old tune a simple way,
1. open the original image, hue saturation: saturation -55
2. to be the red channel of the curve compared to the value and extent according to the picture, doing the color contrast of green channel, blue channel reverse contrast,
3. hue saturation: saturation -35
4. Duplicate the layer, Filter - Other - High Pass, I use the value is 250, mixed mode to Multiply,
5 to be a gradient map adjustment layer, black - white,
6. Filter - Blur - Gaussian Blur, Radius 4, can increase the image of mystery, given rise to people,
7. the picture uncoordinated blue saturation -100, brightness -100,
Photo Name: black and white retro color,
1. Duplicate the layer and into the channel, copy the red channel, a copy of the red channel curve adjustment, input 100, output 3,
2. with a brush or selection tool, the characters and filled with white flowers,
3.Ctrl + click on the red copy to make it into a constituency, remove red copy, return to the Layers panel,
4.Ctrl + C copy, Ctrl + V paste, figures and flowers Cutout complete,
5. method I: New Fill Layer, R = 255, G = 128, B = 173, the layer to color mode,
6. Method Two: saturation coloring, New Hue Saturation adjustment layer, color playing in front of hook, Hue = 345, Saturation = 60, Lightness = 0, the new curves adjustment layer, 237,255; 188,130
7. Method three: the new color balance layer, the middle tone - Levels: +100 , -54, -20 / +100, -35, +43
shadow - Levels: +11, -7, +3. New optional color adjustment layer, red: 0, +21, -23, - 5. Magenta: -100, -45, +32, -1
8. gradient maps use the new Gradient Map 1, layer to color
Photo Name: Ps-painting effect,
9, back to the Layers panel, foreground to white, the new layer, Alt + Del keys, will fill the selection white.
10, cut to just the copy of the hair, eyebrows and layers, the first for relief effect, sub-black and white. Data reference value before the eyes, eyebrows and hair contrast with the great change, a little out of tune with the body, add a layer mask, to cover up unexpected places.
11, load line of the path previously described, according to Ctrl + Shift + I, reverse selection, draw around the color, use the eyedropper tool, slightly modified the original hair.
12, as some of the details of the parts, using brush and imitation stamp tool, the modified back and forth and you're done friends!
Photo Name: young people in dealing with a delicate skin,
1. open the original image, duplicate the layer,
2. a new blank layer, fill it with black, copy the following into the background,
3. a copy of the coating to adjust, select the lasso tool, the large half-length figures ring out, emergence 30, Ctrl + Shift + I Invert Selection, Delete remove,
4. create a new layer. Blending mode to So heavily black and white photos, this color is very beautiful embellishment.
5.Ctrl + L tone good order, the image compression darker, 116,1,255
6. a new layer, add text, add every piece of text is best to create a new layer, so that more of the layout flexible,
Photo Name:
1. open the original image, the maximum contrast of the blue channel copy,
2. and further increase the contrast with Levels, the purpose is to just let the stone there are many levels
3. the adjustment of a good blue Copy to copy the layer inside the channel and you want to add color, I used the deep orange
4. to copy the red channel to the base map layers, using masks to remove the sky and stone, leaving only grass and to add color with the Gradient Map
5. open the material lightning ball, copy the red channel contrast to just the largest file
6. Select the layer blend mode to Overlay and adjust the location and size, making it a light source, remove some extra stuff (to decide), then use the radial blur filter to handle about radiation, allowed the formation of emitted light beam
7. to copy the base map of the channel inside the red channel to enhance the contrast, so grass high light revealed more clearly, and then select Paste to a layer of high optical parts inside, filled with white, the layer mode to overlay, then use the mask to remove the white part of the sky, leaving only part of the grass, the grass appears to be bright light of the light sense
8. Select Layer 1 and then invert the mask, get the sky constituency, adding curves and hue / saturation adjustment layer and adjust their personal preferences like color and purity
9 Finally add some posters elements, so fake posters that look real, the use of color, I try to choose a stone and gold to the color of sand, so the color has been echoed
between Photo Name: citing the exchange of ideas and creative master,
1. open the original image, Ctrl + U, Hue Saturation, Hue -79, Saturation 22, Lightness +17,
2.Ctrl + M, tone curves, the red channel, slightly raised up some,
3. Create a new layer, set the foreground color to: # F9DA06, background color set to black, go to Filter> Render> Clouds, Ctrl + Alt + F to enhance look, layer blending mode to painting, brush size 6, Sharpness 0, the type of simple brush, add a layer mask, and some of the people some of the ground below with a black brush wipe out
5. Create a new layer fill color: # ADF871, layer mixed-mode to
Reprinted from 395933489 at 15:57 on July 26 2010 read (loading. ..) Comments (0) Category: Personal Diary
Photo Name: Photoshop,
Photo name: bring up the photo a soft blue and yellow - a simple way,
1. open the original image, the new layer (Ctrl + Shift + Alt + N), then stamp the visible layers (Ctrl + Alt + Shift + E),
2. into the channel, copy contrast to relatively strong the green channel, and then increase the contrast, white white, black, black, or with a brush (overlay mode) Ctrl + Green channel copy, extract constituency
3. the sky material delay in, the establishment of the mask, rub the figure
4. establish layer, soft mode, make the sky look better,
5. to do the water reflection, Ctrl + T vertical flip, the establishment of the mask, with a brush to draw their desired effect , Multiply mode effect better, because figure varies,
6. color, adjust according to personal habits, good with the optional color,
7.Shift + Ctrl + Alt + E, stamp shown in Figure layer, layer mode Multiply, and then mask the darker corners of pressure,women in bikinis, mainly for the water pressure dark, so the screen more balanced,
8. Filter - Noise - Add Noise, number 3, Gaussian distribution, color, make the characters and the same grainy sky,
9, the final fill the sky material
Photo Name: PS in turn hand-drawn pictures,
1. open the original file, according to their own feelings through color adjustment to adjust the film, and then resurfacing, dermabrasion value not too much, (Neat image plugin)
2. a new layer, color FEE7D6, (according to the film character's skin color to set ), the layer mode to Overlay and 25%, 20% with a brush the skin on the face and neck light coating,
3. features of the detailed work, cutting out the mouth, the emergence copy (Ctrl + J), with Smudge tool to smear on the lip, the lip skin becomes soft and delicate (not too much strength)
4. Create a new layer to the lips and face color, color FDC1D6, the layer mode to color, with a brush in the side of the lips and face painting,
5. with the Dodge tool, the range is the high light exposure of 25% to draw the lip of the high light, with the Burn tool, the middle range, exposure 20% enhance lips contrast,
6. a new layer, color 8E1A25, brush pixel is 3, draw the inside of the inside, then draw 2 pixels outside the lip lines (some lines to build high-light mask Dodge some)
7. circle the emergence of the nose, copy, use the smudge tool around the gentle refinement of the nose, then use the Dodge tool range is a high light exposure of 20%, to strengthen the high-light the next part of the nose, then color 422B2D, 2 pixel brush to draw the nose contour (lines light up with a better tool if to make up for the next)
1, open the original image material, press Ctrl + J to copy the background layer to layer, point channel panel, select the blue channel, image> apply image, layer as the background, mixed to Multiply, Opacity 50%, RP tick,
2, back to the Layers panel, create a curves adjustment layer, and blue channels: 44,182, red channel: 89,108
3, create a new layer, fill it with black layer blending mode to Multiply, Opacity to 60%, choose the Elliptical Marquee tool constituency middle section, press Ctrl + Alt + D Feather with a value of 70, and then double-click the Delete key to delete, then play on words to complete the final effect.
Photo name: bring up the photo a beautiful red and yellow,
1, open the original image material, Ctrl + J to copy the background layer to layer, press Ctrl + Shift + U to color, Execution: Filter> Blur> Gaussian blur, number 4, layer blending mode to Screen, the layer opacity to 27%.
2, create a new layer, press Ctrl + Alt + Shift + E back layer, layer blending mode to color. 3, create a gradient map adjustment layer, purple - orange, Alt + Ctrl + G with a clipping mask.
4, create a brightness / contrast adjustment layer, -5, -21
5, create a Smart Sharpen adjustment layer, set to the default value, number 46, radius 0.8, Gaussian blur,
6 create a Levels adjustment layer, 8,1.00,255
7, create an optional color adjustment layer, Red: +17, -8, +16,0, yellow: -54,0, +10, + 18, White: -5,0,0,0,
1. sketched with a pen in the back of a wing shape,
2. in the current working directory into the path 1, double-click the work path.
3. the path into a selection (Alt + Enter), copy the layer, Feather 3 pixels,
4. filled with white, select the appropriate intensity of use of the smudge tool, the appropriate edge of the painting.
5. Duplicate the layer and fill different colors, combined with differences between layers 1 can regulate the transparency of the Oh layer properties,
6. in accordance with the previous method of production of the second wing, adjust the transparency of the right can black and white gradient adjustment layer and mask adjustment,
7. Create a new layer draw a circular selection, using the brush circle in the constituency, adjust the appropriate degree of transparency,
8. Duplicate the background layer paste into the new Alpha channel, in addition to other places outside the top left corner filled with black, using Filter - Blur - Radial Blur: number 90, blur method: zoom,
9. select Alpha channel (the channel on hold Ctrl), in Fig. floor area a new layer, fill light yellow,
10. with a pen to generate the beam path, the path into a selection, yellow and white gradient fill color,
11. adjustable transparency, light rub with the eraser at the bottom, is light becomes natural,
12. people who sketch with a pen in the light path, the path into a selection, the edges of strokes with a painting, adjusting transparency, combined with the eraser and smudge tool will achieve better results and spend Several halo effect will be better
Photo Name: make a crumpled old photograph was,
1. Create a new layer, brush with history, a long loose brush 20,
2. the whole first sweep again, just painted,
3. 7 of the brush to draw with the edge and detail, and then 1 brush to draw facial features and clothing items,
4. taut mouth painting style changed the face details
5. with the blur tool to draw facial details
6. copy layers, filter - Artistic Effects - Painting painting, brush size 5, sharpness 15, brush types - simple
7. Filter - Texture - textured, texture - canvas, zoom 84 percent, highlighting 5, light upper right
Photo Name: crack - Football Baby tutorial,
11. curve brighter, so that the face full, the output 138, input 118.
12. eyebrows, the eyebrows and top of the circle with the skin with a lasso tool, the emergence 5, copy a layer, the Duplicate the layer and move down in order to achieve eyebrow shaping effect, stamp eyebrows, this must be very careful
13. began to adjust your eyes, choose the part of the eye ring out, copy the layer
14. pen circle to do eye shadow region, copy a layer, the curve of pressure dark color to adjust,
15. then uniform color eye shadow, color balance (middle tone): +50,0,0. (Shadow): +20,0,0,
16. The details of color adjustment, the upper eyelid 1 / 3 part, Hue Saturation: 0, -40,0
17. Circle the details of the upper eyelid eyelash root Department, under the eye before eyelid 1 / 3, press the DELETE key to delete the selection, the exposed high-light position,
18. remove the extra part of eye shadow, feather 40
19. circle detail on the inside corner to the eyelid 1 / 2, press the DELETE key to delete the selection, so that exposed Highlight
20. circle the eyes out, copy the layer, emergence 1, part of desaturation whites, mottled back, Hue Saturation: 0 -50,0
21. whites details of the adjustment, curves adjustment to increase the light,
22. eyes bright tone reproduction curve after layer, brush pen on the back half of the left eye, showing some shadows,
1, doing the figure ahead of the graph: Image - Adjustments - Auto Levels, Auto Contrast, Auto Color adjustment,
2, open the original image, copy the background layer,
3 , the new hue saturation adjustment layer, red: -80, yellow: -80 blue: +32
4, color balance: -20, +20, +50
5, curve adjustment, value: 38, 36
6, hue saturation,bikinis women, blue: -45
7, optional colors, blue: -10, +20, +24,0, blue: +20,0, +10,0, neutral colors: (black) +5, black: (black) +5
8, load the blue channel selection, making the curve adjustment, the value: 74,119
9, brightness, contrast: 0, +10
10, seal all the layers, (Ctrl + Shift + Alt + E), to carry out resurfacing and other simple images softened,
11, to start the background copy layer Sticky copy, mixed mode Soft Light, opacity 25%
12, re-stamp all the layers, marked with lighting effects, filter - render - lighting effects, opacity 50%, other values to default values. Add a mask, the exposure over the place back rub,
13, brush on your favorite brush, add text, complete
Photo Name: elaborate water on the woman,
1. open the original image, create a curve adjustment layer, click the V to paste, to get the layer 2, mixed mode to Multiply,
3. open sky material, Ctrl + A Select All, Ctrl + C copy, Ctrl + V paste, Ctrl + T to free transform the appropriate size of the pull position , Blending Mode to Overlay, with a rubber or brush on the mountain and lake blue clouds wipe
4.Ctrl + J copy the sky layer, Ctrl + T right , mixed mode to Overlay and wipe the mountain and some overlap in the sky,
5. copy layer in the sky layer to enhance the texture of clouds in the sky,
6. stamp visible layer (Ctrl + Alt + Shift + E), Filter - Blur - Gaussian Blur. Radius of 15, mixed mode to Soft Light,
7, add the hue saturation adjustment layer, saturation -35, so the picture is more gentle,
8. Add channel mixer adjustment layer, the red channel +100,60 , -8, green channel 30. +100, if the intensity high, the beginning of the curve can be used to adjust the brightness level down, you can change the channel mixer adjustment layer's blend mode br>
Photo Name: sea beach,
1. to find a fold of the background, will need to produce photo drag the background layer, resize and cropping, border and background to the match,
2. adjustments - hue saturation, the whole map: saturation -35 degrees, brightness +10,
3. adjustment layers into a soft mode, the effect of the old photos out,
4. hue saturation, the whole map: 0, -80,0
5 Duplicate the layer, hue saturation - color: 340,24,0
6. create a new layer on top, fill it with black,
7. Filter - Noise - Add Noise, increase in the old sense, the number of 25%, Gaussian,
8. Blending Mode to Multiply,
9. Image - Adjustments - RP,
10. to remove the border of variegated, Select the rectangle tool to select the inside edge of the border, DEL key to delete the profile part of the variegated,
11. clashes with the eraser tool around the variegated character
Photo Name: Fun color - color thinks,
1. Duplicate the background layer. Filter - Blur - Gaussian Blur, Radius 10.
2. set the layer blending mode to Double-click the layer name to open the right mixture of options. In the advanced hybrid, cancel advanced R and G channels,
3. The use of color balance the image of the curve, according to the picture to determine
4. A new layer, select the repair Brush (J), select level sampling. Of large freckles or blemishes, imitation removed.
5.ctrl + shift + alt + E, stamp all the layers, the skin part of the tick, you can choose their own way, I personally prefer the pen tool, but you can also use the polygonal lasso tool to Note that to deal with the skin, so to remove the eyes, eyebrows, lips, nostrils. Anti-selection (ctrl + shift + i) Remove all but the skin, excess parts.
6. Filter - Blur - Gaussian Blur with a radius of 20. Set layer opacity to 75%
7.CTRL + J, duplicate the layer 3 filter - Other - High Pass, a radius of 4, mixed mode to
Photo Name: tune out the brilliant color photos,
8. eclosion circle replication of the eye brows with the smudge tool on the soft skin around the eyes, thinning eyebrows, and then use the Dodge tool range is a high light exposure of 15%, to strengthen the high light under the eyes, with better tools the middle range, to deepen the lines around the eyes,
9. with the smudge tool to smear some of the detailed eyes, look softer, with some better tools to enhance black eyes, with the Dodge tool range is a high light exposure least 20% of high light to enhance eyes and make the eyes look brighter,
10. color 080101, 3-pixel brush, draw eyelashes part (the line Dodge tools to deepen the color depth can be used to make up) eyelash line can also be used paths and some other methods tick,
11. with the smudge tool to apply the prettier eyebrow, brow a little rough spots slightly darker color, apply diluted down along the back, then two pixels with a brush in front to draw eyebrows eyebrows lines, so eyebrows more structured,
12. Smudge tool to choose the hair brush, (according to hair texture to set brush shape), applied the process to be applied along the hair texture, not too much force, to be applied uniform,
13. hair brush coated with a normal part to convergence, (hair must be applied carefully)
1. Open the image, duplicate the layer,
2. simple dermabrasion, choice - color range, with a straw point their skin color, the color tolerance of about 103, Ctrl + J to get a new layer, Ctrl Click to choose, add a mask with a brush (the foreground color to black), remove the hair around with some,
3. Filter - Blur - Gaussian blur, pixel 1.7, reducing the opacity of the layer, to achieve natural dermabrasion effect,
4. options - color range, with a straw draw hair color, the middle of straw + increased with the selection, the new curves adjustment layer to increase the contrast, according to the picture properly adjusted,
5. Mouse Left-point curve 1 mask, there constituencies, the new Levels adjustment layer Levels: 16,1.11,214
6. New Hue Saturation adjustment layer, red: -54, Yellow: -100 < br> 7. create a new group, to incorporate all of the above adjustment layer to facilitate the finishing trim,
8. New Group, for the hair color decoration, the new layer with a brush (white), hardness 0, Fig. properties of soft layer model,
9. Create a new layer with the pen tool hook lines (Pearl path), arbitrary lines, neat point, straighten hair, make hair chaos in the orderly,
10. with brush tool , F5 shortcut key to bring up the brush settings dialog box, 13 pixels, hardness 100%, 105% pitch, dynamic shape, smooth, the angle 0, roundness 100%,
11. switch to the path panel, select the point of the right triangle described side of the path,juicy swimsuits, to determine,
23. remove the pupil part
24. with a curve to adjust eye color, so that the same
25. plus eyes high light
26. circle the lips, emergence 2, high-gloss lips curve adjustments to adjust the lips color
27. adjust the nose Liang Gaoguang, adjust shadow highlight
28. with optional color palette as a whole, the middle color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light): 0,2, -2.
30. liquefaction along the hair pull, combined with lens flare, light 182,35 mm focus,
31. plus, where appropriate, final flash brush complete
Photo Name: ink effect to your photos,
1. open the original image, duplicate the layer, fill pure black, overlay mode.
2. New Hue Saturation layer: saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0, +30,0 , +100. Yellow: 0, -15, -100,0. Intermediate color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, gloss 0, the material 69, 0 exposure, the environment 8,
6. stamp, plus text-decoration
1 First he took a shot a good picture.
2 with mask mask part of the sky.
3 Add the sky section, and placed in the bottom of the screen can be adjusted.
4 new layer to the third layer, mainly to adjust the picture tone.
5 changes on demand is not transparent, change the layer properties to Soft Light.
6 In order to find oil in the texture effect, in color and then add a layer above the layer of material amend
7 layer properties to Soft Light, opacity changes on demand. This opacity is 86%
8 add mask, according to the need for appropriate trade-off screen content.
9 in order to strengthen a sense of texture, then create a new layer, filled with gray.
10 In the Add Noise filter to Gaussian and check the color, the number of custom.
11 layer to Soft Light.
12 according to the screen needs to be adjusted with the appropriate mask.
13 Noise, Add Noise - number 400, Gaussian distribution,
Photo Name: commercials of color and design,
1. Duplicate Layer, New Adjustment Layer-channel mix, gray channel, red +64%, Green 2%, 10% blue, monochrome
2. New solid mixed layer, select 575 046 colors, blend mode to Color,
3. New Curves Adjustment Layer, ① - input 68, output 32, ② - input 114, output 68, ③ - input 208, output 197,
4. create one solid layer, select 443B25 color, blend mode to color, press Alt-click mask,
5.Ctrl + D to restore the default background color, Ctrl + Delete to fill the black mask the background color,
6 to change the picture in high light and dark parts of the color transition to enrich the color, use a brush inserted in the mask
need some color, 300 pixels, opacity 10%, flow 100%
7 fonts arrangement and design
Topics related articles：
