Compression tube fitting isn’t the most popular thing in the world. It is not an ideal subject for coffee table discussion by any means, but did you know

compression tube fittings are everywhere around you and affecting your daily way of life? They are stuck in places you don’t normally look unless you’re a plumber or an engineer.

What is a compression tube fitting  ?

The earlier statement about compression tube fittings being everywhere in your surroundings is true. These fittings are common in household plumbing, especially in hot and cold water taps and toilet valves. Valves,like Valve manifolds in water taps and toilets are designed to control a single fixture to avoid having to turn off the water supply to the entire house. Compression tube fittings fit this bill nicely, since they can be made from materials that prevent the valves, tightly packed in confined spaces, from becoming a fire hazard. When all is said and done compression tube fittings are as essential to factories and industrial plants as they are in your own home.

An instrument valve is used for isolation of pressure gauges, orifice plates, flush rings, and various measurement instruments.  The instrument valve normally “lives” in the open position and is closed only to isolate the instrument for service or replacement.

A Transmitter Isolation Valve is a valve that is used to isolate media in a tank from a pressure / level transmitter.  The pressure measurement allows calculation of the level of liquid in a tank.  The TIV lives in the open position thus creating a communication between the media in the tank and the transmitter.  The valve is only closed when the transmitter needs to be isolated for service or replacement.

At the same time,our company also supply other products including  Needle valve and Instrument ball valve , if you want to know more information,please visit our web:www.fd-lok.com ,or call us.

Spiral wound gasket is used in high pressure and high temperature applications. AUTO has a wide range of designs and materials. In addition, we can produce specially made Ring joint gasket very quickly in our own production facility.

Spiral wound gasket Type：

1)R: Basic type for tongue and grove or male and female or grooved to flat face flanges.  Inner and outer diameters are reinforced with several plies of metal without filler to give more stability and better compression

Style R equipped with an external metal ring which centres the gasket between the bolts and acts as compression stop. Prevents the gasket against blow-out.

2)C/O:Style C/O equipped with an internal ring for additional compression stop. Provides heat and corrosion barrier. Prevents flange erosion in steam applications. Prevents also "buckling" (possibility for the spiral to spring into the pipe). Allways advised with PTFE as filler.

3)CG-LS: The LS spiral wound gasket is specially designed so that compression and sealing requirements are achieved under very low seating stress. The LS gaskets are intended to use in low pressure flanges where low bolting levels are present like for stainless steel bolts.

If you want to know more information about Spiral wound gasket and

Ring joint gasket ,please click our web :www.autosealing.com .

For a mold maker ,Yuyao Hualong Moulds Plastic Products Co.,Ltd . was initially established in 1988,but presently it is located in Far East Industrial Park, Yuyao City , Zhejiang Province, covering a 9000-sqm floor space along with over 8000-sqm modernized factory buildings ,RMB 15 million yuan-worthy fixed assets ,more than 10 plastic injection machines with specificagions ranging from 100 gr to 3500 gr. More than 10 mould-making units and over 100 employeess ,including over 30 managerial and technical persons.

As a professional injection mold maker , die casting mold maker, blow mold maker,plastic mold maker and molding supplier, we make molds for automotive, refrigerators, office automation machines and home appliance in order to produce good quality plastic products. In addition, we have solid plastic surface treatment technique e.g. vacuum metallization, spray painting and can perform auto/semi-automation assembly for all plastic products. Almost 70% molds and 20% molding parts were exprted to oversea, such as North America, United Kingdom, Italy, France, Germany, Japan, and South Korea etc.

If you want to find a mold maker , our company is your best choice.

Kingbe New Building Materials Co., Ltd. as a manufacture with professional equipment and high kills that manufacutring and exporting all kinds of fiberglass wallcovering.It is located on the south coast of Hangzhou Bay Bridge, Cixi City, near No. 329 National Highway with convenient transportation. Our company has registered capital of RMB10 million, total assets of RMB130 million and 66,670 square meters of the building area.

Fiberglass wallcovering can be widely used for various walls and ceilings in both surface and internal surface as a new building decoration material. Walls covering with

 fiberglass wallcovering and paint have the property such as flame retardant, antisepsis, mould proof, shock resistance, cedrate resistance, cracking proof, washable, and air permeable. With its beautiful physical appearance, fiberglass wallcovering can be widely used in public amenities, high level hotels, shopping malls, conference halls, hospitals, and residential houses.

Features:

Flame retardant

Shock resistance

Cedrate resistance

Washable

Air permeable